M3 Metal Pen Blank Rods
A recent reintroduction to our lineup. We have brought back M3 metal blanks, now in rod form. For those of you not familiar with this cool material, they are made with high purity metals and other exotic elements that have been desconstructed to the macro-molecular level, homogenously combined and then reconstucted with highly refined proprietary chemical binders to create beautiful and unique designs and patterns. Because of this process and composition of the blanks, these can be turned with your normal woodworking tools. While each blank is slightly different, I believe all of them turn a little easier than most Tru-stones. I would highly suggest you use sharp drill bits for best results in drilling the blanks for tubes. They do heat up quickly and if overheating occurs, the chance of a blowout increases.
A special 2 step finishing compound has been created by the manufacturer. A small kit of this finish will be included with each order of up to 5 blanks. It takes a very small amount to polish a pen, so if used sparingly you should be able to do more than 5 pens with a single kit. But additional kits are available if needed.
Photo's of blanks below are only samples to show what the typical blanks look like. But each blank is unique and could vary slightly from the ones pictured. You may not receive one of the exact blanks in the photo.
5-9 = 10% off
10-49 = 15% off
50 & up = 20% off
*Quantities/discounts may be combined with other discountable blanks.